Dry Block Thermostat TDB-120

A traditional dry block thermostat for laboratory analysis.

Thermostat is designed for maintaining constant temperature of samples in tubes inserted in the aluminium block sockets.

Request a quote

Blockthermostat for PCR Analysis

High precision and uniformity of temperature over the block. TDB-120 is widely used for PCR–analysis. Microprocessor controlled temperature and time. Simultaneous indication of set and actual temperature and time.

Block Variants

Block A-103
21 × 0.5 ml + 32 × 1.5 ml + 50 × 0.2 ml microtubes
Block A-53
21 × 0.5 ml + 32 × 1.5 ml microtubes

Order No. TDB-120, inclusive block Please select the appropriate block!	104.1830
Temperature setting range	+25°C ... +120°C
Temperature control range	5°C above ambient ... +120°C
Temperature setting resolution	0.1°C
Temperature stability at +37°C	±0.1°C
Temperature uniformity at +37°C	±0.1°C
Temperature calibration coefficient range	0.968...1.031 (± 0.031)
Display	LCD, 2 х 16 signs
Digital time setting	1 min – 96 hrs (increment 1 min)
Timer sound signal	yes
Overall dimensions (W×D×H)	230 × 210 × 110 mm
Weight	2.8 kg
Nominal operating voltage	230 V, 50/60 Hz
Power consumption (230 V)	200 W (870 mA)

Built in Blocks

Two models are available offering a choice of tube configurations to meet the needs of many standard laboratory procedures.
The blocks are permanently installed in the device.

Please select and specify separately when ordering!

Block A-103
21 × 0.5 ml + 32 × 1.5 ml + 50 × 0.2 ml microtubes