Centrifuge LMC-3000

The LMC-3000 is a modern benchtop centrifuge with low speed.

Maxi centrifuge specially designed for the use of various centrifuge tubes up to 50 ml.

Also centrifuges microplates and gel cards from various manufacturers.

Benchtop-Centrifuge LMC-3000

Soft start and run-down of the rotor
User-friendly setting of centrifugation parameters (speed and time) and simultaneous display of both set and actual values;
Safe operation at any speed is provided by metal protection chamber and case cover, automatic stop at imbalance and a lock keeping the lid closed while the centrifuge is running;
Rotor selection;
Setting rotor speed in RPM or RCF;
Multiple acceleration (Slow, Normal, Fast) and deceleration (0, Slow, Normal, Fast) modes and possibility to switch off forced braking;
Low noise level;
Wide choice of accessory rotors

Order No.	109.3020
Speed regulation range for centrifuge tubes	100 – 3.000 rpm (1610 x g)
Speed regulation range for microtitre plates	100 – 2.000 rpm (560 x g)
Setting resolution	100 rpm
Capacity / Volume (Depending on selected Rotor)	2 x Microtiter plates (Nunc, Greiner, Sarstedt, Corning, Greiner, Bio-one, etc.) 12 x 10-15 ml tubes 12 x 15 ml tubes 6 x 50 ml tubes (Falcon, Greiner, Bio-one, Sarstedt, Corning, Nunc, etc.)
Digital time setting	1 – 90 min (increment 1 min)
Timer sound signal	+
Rotor imbalance diagnostics (automatic stop, “IMBALANCE” warning)	+
Display	LCD, 2 x 16 signs
Chamber diameter	335 mm
Overall dimensions (W x D x H)	420 x 495 x 235 mm
Weight	11.8 kg
Nominal operating voltage	230 V, 50/60 Hz
Power consumption (230 V)	110 W (0.5 A)

Is it possible to turn off forced breaking?
Yes, this function has been introduced from May 2015. By default, centrifuge applies force to stop the rotor.
To toggle between forced breaking and free breaking, press Open key and hold it for 8 sec. Using Down and Up keys, choose between BRAKE OFF (free breaking) and BRAKE ON (forced breaking). Press and hold Open key for 8 sec to exit.

Is it possible to use glass tubes in LMC-3000?
Yes, but only high quality glass tubes for centrifugation, otherwise we do not recommend to use glass tubes.

Data Sheet Centrifuge LMC-3000